Aruba AP-534 (RW) Unified AP (JZ331A)

The Aruba 530 Series Campus Access Points with IEEE 802.11ax technology are designed to deliver extreme-performance access for mobile and IoT devices in environments where device density is very high.

JZ331A provides these features:

Unsurpassed Performance

• The Aruba 530 Series Campus Access Points with 802.11ax technology efficiently and simultaneously serves multiple clients, increasing data rates for both individual devices and as an overall system.
• Multi-user transmission with downlink and uplink Orthogonal Frequency Division Multiple Access (OFDMA) increases user data rates and reduces latency, especially for large numbers of devices with short frames or low data-rate requirements, such as voice and IoT devices.
• Multi-user capability with downlink multi-user MIMO improves network capacity by allowing multiple devices to transmit simultaneously.
• The Aruba ClientMatch technology will automatically attempt to group 802.11ax capable devices onto available AP radios with equivalent capabilities, so that the performance benefits of OFDMA are maximized. This means increased network performance and a boost in network capacity.

Smart Power Management

• The Aruba 530 Series Campus Access Points includes Aruba Intelligent Power Monitoring (IPM) which allows for a gradual upgrade of switching by allowing the APs to operate if there is not enough Power over Ethernet ( PoE) power.
• This feature enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities based on the amount of power available to the unit.
• As higher-performance 802.11ax access points drive more power consumption, the Aruba NetInsight Green AP feature allows the 530 series access points to draw less power when it’s not being used, such as evenings when the buildings are empty.

IoT and Location Ready

• The Aruba 530 Series Campus Access Points provides unique benefits for IoT devices from dedicated channels in OFDMA allowing for simultaneous transmission of IoT connections with low latency, to power saving options with Target Wake Time (TWT) to saves battery life.
• The 530 series supports an integrated Bluetooth Low-Energy (BLE) and Zigbee radio, as well as a USB port for increased flexibility, providing better security and reliable connectivity for IoT devices and for implementing location services.

JZ331A Specification

JZ331A specification

Internet of Things (IoT)
Internet of Things (IoT) Compatible	Yes
Communications Technology	Bluetooth Low Energy (LE), Zigbee
Networking
Form Factor	External
Connectivity Technology	Wireless
Data Transfer Rate	2.4 Gbps
Line Coding Format	CCK, 64 QAM, 256 QAM, BPSK, QPSK, 16 QAM, OFDM, 1024 QAM, OFDMA
Data Link Protocol	IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, Bluetooth 5.0, IEEE 802.11ax (Wi-Fi 6)
Spread Spectrum Method	OFDM, DSSS, OFDMA
Frequency Band	2.4 GHz, 5 GHz
Performance	Maximum data rate (2.4 GHz): 1150 Mbps ¦ Maximum data rate (5 GHz): 2.4 Gbps ¦ Aggregate bandwidth: 3.55 Gbps
Capacity	Wireless clients per Wi-Fi radio: 1024 ¦ OFDMA units: 37 ¦ BSSIDs per radio: 16
Status Indicators	System, status
Encryption Algorithm	WPA, WPA2, WPA3
Compliant Standards	IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac, IEEE 802.3bz, IEEE 802.3bt, IEEE 802.11ax
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	122 °F
Humidity Range Operating	5 - 93% (non-condensing)
General
Device Type	Wireless access point
Ruggedized Design	Indoor
Width	9.4 in
Depth	9.4 in
Height	2.2 in
Expansion / Connectivity
Interfaces	1 x HPE Smart Rate - RJ-45 ¦ 1 x USB 2.0 - Type A ¦ 4 x antenna - RP-SMA x 4
Power
Power Over Ethernet (PoE) Supported	PoE
Antenna
Antenna	External detachable
Antenna Qty	4
Software / System Requirements
OS Required	ArubaOS, InstantOS